Furniture
Bookshelf
Budget the repeated shelves before pricing the complete bookcase. Shelf depth and grain direction often decide whether an apparently spare strip is usable.
Estimate bookshelf panels →Interior fit-out
Under-stair storage panel cost planner
Estimate rectangular storage blanks beneath an existing stair. Sloped pieces require measured geometry: a rectangle allowance does not describe the final angled cut.
One material · one repeated part
Estimate rectangular blank stock and cost
Editable demonstration: 4 rectangular blank pieces, 1100 × 550 mm. The sheet price is illustrative, not a supplier quote. Replace every value with your own measurements.
Keep the checked result
Turn the allowance into a checked cut plan
Recreate your confirmed parts in CutList on iPhone or iPad. Review sheet layouts, grain direction and the cutting sequence. Pro adds on-device AI Scan, PDF export, AirPrint and unlimited projects.
- Free basic layouts
- Pro features require a subscription
- No login
- Works offline
On a computer? Scan with your iPhone or iPad.
The App Store link does not transfer these inputs. Enter and review your parts in CutList; a paper list can be scanned using Pro AI Scan.
Before measuring this panel group
- Template the existing slope and check access, services and door swing.
- Use bounding rectangles for this allowance; retain the angled offcut as waste until proven reusable.
- Keep the storage design independent of the stair structure and required clearances.
Not included: Angled cut geometry, doors, hardware, services and structural stair work are excluded.
Review the related parts or layout tool →Build the checked parts list in CutList
Use CutList for the rectangular sheet blanks. Mark and verify the angled finishing cuts separately from the sheet layout.
Confirm actual stock thickness, sheet dimensions, saw kerf, usable edges and permitted rotation. An allowance cannot establish a cutting order. Review the generated layout before ordering material, and keep the approved project available in the workshop.
See layouts, cutting sequence and Pro exportsIf the job also includes a stair
Keep stair geometry in Stringer
Use Stringer for riser options, stair geometry, stringer diagrams and a stair cut-sheet PDF. The rectangular storage allowance above does not calculate a stair or verify its structure.
See Stringer for this part of the jobKeep the estimate consistent
Estimate another job
Cabinet shop
Kitchen cabinet
Start with cabinet side panels, then build up the remaining stock groups. Carcass panels and thin backs cannot share one purchasing calculation simply because both are plywood.
Estimate kitchen cabinet panels →Fitted furniture
Wardrobe
Check tall gables against available sheet length before estimating cost. A low area total is of little help if a full-height panel cannot fit the selected stock.
Estimate wardrobe panels →